Dbx 20 Series Betriebsanweisung PDF herunterladen (Seite 52)

Error Code

692

16

DWA 05

000

No status change of

the dynamic scale

motor encoder (inter-

nal sensor)

1 Take out envelopes in the

machine if any -

2 power Off, then On the

machine (or unplug) - if

this message appears

again: - ask the operator to

Take out the Dynamic

Scale , - mail temporarily

with the Weigh Platform

instead,

Check motor enco-

der/ motor/belt/main

board/motor con-

nectors

DWA 07

000

The dynamic scale

software is most pro-

bably corrupted

(detected at start up)

1 Operate a dynamic scale software Download

(and ask the customer to call OLS) -

2 Or ask the operator to Take out the Dynamic

Scale , mail temporarily and uses a Weigh Plat-

form instead,

DWA 11

000

the Envelope length is

out of specification

(over 330mm/ 13") to

be mailed with the

dynamic scale

1 Try to mail the envelope in portrait mode (verti-

cally)

If this envelope cannot be processed by the

Dynamic Scale please tell customer to weigh the

envelope on the WP , and use a Label

DWA 11

001

the Envelope length is

out of specification

(dynamic scale), less

than 120mm / 5"

1 ask the customer to weigh the envelope on the

WP , and use a Label

DWA 11

002

there is an envelope

jammed in the dyna-

mic scale area: entry

sensor

1 Take out the envelope that is on the Dynamic

scale

2 Clear the message (press OK key)

3 Check the mail, then continue the "entry sen-

sor" may need to be cleaned (dust , etc..) or

replaced

DWA 01

000

the "dynamic scale

entry"sensor is mas-

ked at power on

Ask customer to check if

there is any part in the

entry of the dynamic scale,

(left side)

1 Most probably an

envelope is in the

entry sensor area of

the dynamic scale

If not, the sensor is

damaged and need

some repair

DWA 01

001

the "dynamic scale

oversize"sensor is

masked at the power

on

Ask customer to Take out

any on the oversize sensor

(left side of the dynamic

scale) and restart system

1 Most probably an

envelope is in the

oversize sensor

area

If not, the sensor is

damaged and need

some repair

Code Description Helpdesk On site

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 61 62

Kommentare zu diesen Handbüchern

Keine Kommentare