Dbx 20 Series Betriebsanweisung PDF herunterladen (Seite 53)

Error Code

693

DWA 01

007

the "dynamic scale

oversize"sensor is

masked during weig-

hing phase

Ask customer to try with

change on selection on

feeder

1 Check gap bet-

ween envelope is

enough - most pro-

bably an envelope

is in the oversize

sensor area

If not, the sensor is

damaged and need

some repair

DWA 01

008

the "Zero weight"of the

dynamic scale is out of

valid measure (+/-0.2g

TBC)

1 Take out the envelope on the dynamic scale

2 Check if nothing disturb it (fan, envelope resi-

due, weak table, somebody is leaning on it, etc..)

then press on OK key to clear the error

DWA 01

009

the "dynamic scale

entry" sensor is activa-

ted when the batch

starts

1 Take out the envelope

2 Press on OK key to clear the error

If it is still occurring, may be the sensor needs to

be replaced

DWA 01

010

the dynamic scale

"oversize" sensor is

activated when the

batch starts

1 Take out the envelope

2 Press on OK key to clear the error if it is still

occurring, may be the sensor is activated by some

light around the machine ( lamp, sun, etc..): ask

to check , Take out , hide etc..

Iif it is still occurring, may be the sensor needs to

be replaced:

DWA 02

000

the Dynamic scale

detects a weight of

more than +/- 400gr

during the initialization

1 Take out the envelope

2 Power Off, then On the machine (or unplug)

If it is still occurring, may be the dynamic scale

needs to be recalibrated or the load cell to be

replaced:

DWA 02

001

the base board, load

cell or cabling in bet-

ween is most probably

damaged

1 Ask the customer to

power Off, then On the

machine (or unplug)

2 If it fails again, then pre-

pare a tech visit to replace

the Dynamic Scale main

board, cable or the load

cell

Replace the Dyna-

mic Scale main

board, cable or the

load cell

DWA 02

002

the Dynamic scale

analog / digital conver-

ter detects an error

during the initialization

1 Ask the customer to

power Off, then On the

machine (or unplug)

2 If it fails, then prepare a

tech visit to replace the

Dynamic Scale main board

Replace the Dyna-

mic Scale main

board

Code Description Helpdesk On site

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 61 62

Kommentare zu diesen Handbüchern

Keine Kommentare

Dbx 20 Series Betriebsanweisung Seite 53

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio-Equalizer Dbx 20 Series